Coswick Coatings and Adhesives
Паркетная химия Coswick
RU
0
Product was added to your cart
  • HOME
  • CARE PRODUCTS
    • HOUSEHOLD
    • PROFESSIONAL
    • INDUSTRIAL
  • TECHNICAL DATA
  • EVENTS
    • NEWS
    • TRAINING CENTER
  • PROJECTS
  • CONTACTS
  • WHERE TO BUY

Renewer oil for oiled and hardwax-oiled hardwood floors

renewer-oil-for-oiled-and-hardwax-oiled
Home / HARDWOOD FLOORING CARE PRODUCTS / Hardwood flooring care products / Oiled and hardwax-oiled / Wear layer restoration / Renewer oil for oiled and hardwax-oiled hardwood floors

Renewer oil for oiled and hardwax-oiled hardwood floors is a composition of natural oils with the addition of wax.

BENEFITS:

  • Easy to use;
  • Allows to increase durability of the surface;
  • Restores the initial look of the flooring surface;
  • Adds antistatic, soil and water resistant properties.
← Back
Clear
WHERE TO BUY
  • Technical sheet
  • Description and application
  • Downloads
  • Components
  • Ask our experts
  • Reviews (0)
ReferenceTDSProduct nameCategoryPackingConsumptionBox pcsTray pcsManufacturing standard
4200-020000
Renewer oil for oiled and hardwax-oiled hardwood floorsLocal repair and renovation products0.75 L5 – 10 ml/m²9 pcs.432 pcs.TУ BY 101040134.002-2014
ColorTime to dryReadiness conditionShelf lifeStorage and transportation conditions
Gray liquidFor light loads (walking) – 12 hours in a well ventilated room.
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.
Ready to use, does not need to be dissolved12 monthsKeep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.
Safety requirements:
FLAMMABLE! For intended use only. Keep out of reach of children. Wear suitable rubber gloves when using the oil. Avoid contact with mucous membranes. If underventilated, use a respiratory protection. Do not inhale oil fumes. Avoid release to the environment.

Disposal:
Dispose of the preliminary water-soaked rags with oil remains in the tightly closed container.

Description and application

DESCRIPTION

Renewer oil for oiled and hardwax-oiled hardwood floors is developed specifically for periodic renovation of hardwood flooring, furniture, stairs, wall panels finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil) and restoration of protective properties.

The oil creates a thin oil-soaked wear and tear resistant film on wooden surfaces. It gives a water- and soil-resistant features to the surface.

The renewer oil is used when the hardwood flooring surface looks too “dry” (rough) or a main finish was worn off due to the heavy loads.

Periods of renovation depend on type of the facility and its’ loads:

Room typeFinish type
UV-OilHardwax-oil
Living roomsOnce in 3-5 yearsOnce in 1-2 years
Public placesLow and average loadsOnce in 3-6 monthsOnce in 1-2 months
Heavy loadsOnce in 1-2 monthsOnce in 2 – 3 weeks

APPLICATION

PRELIMINARY WORKS:

Clean the floor from dust and litter using a vacuum-cleaner.
Clean the floor with the hardwood flooring cleaner. Avoid overwatering, after the cleaning the flooring has to be dry in 2-3 minutes.
It is recommended to provide the following climatic conditions: temperature +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure a good air flow during the whole application and drying process.
MANUAL APPLICATION
AUTOMATIC APPLICATION

MANUAL APPLICATION

Important! Shake well before use.

Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly.
When applied, rub the oil with clean, non-colored rags, remove the oil excess to avoid heavy stains and beads.
Time to dry:
For light loads (walking) – 12 hours,
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.

AUTOMATIC APPLICATION

Important! Shake well before use.

Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly.
After the application, rub the oil using a single-disk white pad buffing machine.
Time to dry:
For light loads (walking) – 12 hours,
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.
FLOORING CARE:
We recommend to use Coswick cleaner for oiled and hardwax-oiled hardwood floors.
TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.

VIDEO

Surface renewal for oiled and hardwax-oiled floors care

Catalogue

Catalogue

TDS

TDS

MSDS

MSDS

Service manual

Service manual

ComponentsDescription
Natural oilsOil deeply penetrates the wood fibre. Once dry, the oil-treated fibre creates a durable and wear-resistant layer. Due to its natural characteristics, the oil steeps the wood keeping the pores open and allowing the wood breathing.
I’ve read and accept the privacy policy

Reviews

There are no reviews yet.

Be the first to review “Renewer oil for oiled and hardwax-oiled hardwood floors” Cancel reply

Your email address will not be published. Required fields are marked *

I’ve read and accept the privacy policy

You may also like…

  • Felt chair leg floor protection-new

    Set of felt linings

  • service-kit-oil

    Service kit for oiled and hardwax-oiled hardwood floors

  • Protective wax for hardwood floors

    Protective wax for oiled and hardwax-oiled hardwood floors

  • Wood onlay

    Wooden onlay

  • Очиститель 4 (1)

    Heavy duty cleaner for hardwood floors

  • 2-2-laquer

    Cleaner concentrate for lacquered hardwood floors

Contacts
Dealers' area
News and media
Sitemap

Follow us

Email
Facebook
Twitter
LinkedIn
YouTube
Vimeo
Instagram
Pinterest
Houzz
Viber
RSS

Certificates

nwfa_logo ce_logo ISO 9001leed-logo

Contacts

Republic of Belarus,
Y. Kolasa str., 2B, Zaslavl
+375-17-543-2012
+375-17-543-2020
sales@coswick.com
© Coswick Ltd. 2008-2023 All rights reserved | Privacy Statement | Terms Of Use