Паркетная химия Coswick
RU
0
Product was added to your cart

Waterborne wood stain

aqua-wood-stain-for-hardwood-floors5

Waterborne wood stain is a composition of urethane polymers and micronised pigments designed specifically for wood toning.

BENEFITS:

  • Easy to use;
  • Water-borne;
  • Minimizes the appearance of blotchy finish;
  • Provides even toning of the whole surface;
  • Allows to get a solid, bright tone.
← Back
Clear
Product nameTDSPackingConsumptionBox pcsTray pcsManufacturing standard
Waterborne wood stain for wood toning
 1 kg30 – 40 g/m² for a single layer4 pcs.1920 pcs.TУ BY 101040134.004-2015
COLOR PALETTE

COLOR PALETTE

Aqua White
Art: 4120-020042

Bonsai
Art: 4120-020085

Bergen
Art: 4120-020046

Birmingham
Art: 4120-020068

Katana
Art: 4120-020076

Kyoto
Art: 4120-020077

Okinawa
Art:4120-020081

Payne’s Grey
Art: 4120-020091

Davy’s Grey
Art: 4120-020055

Spinel Grey
Art: 4120-020067

Shibumi
Art: 4120-020082

Raw Sienna
Art: 4120-020009

Titanium Buff
Art: 4120-020031

Haiku
Art: 4120-020083

Fuji
Art: 4120-020079

Edinburgh
Art: 4120-020070

Readiness conditionTime to dryShelf lifeStorage and transportation conditions
Ready to useWhen applying one layer — 4 hours.
When applying two layers — first layer – 1 hour. Second layer – 6 hours.		12 monthsKeep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.
Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

Description and application

Description

Woterborne wood stain is a composition of urethane polymers and micronised pigments specifically developed for wood toning.
The wood stain is designed for decorative coloring of non-finished, sanded wooden surfaces: wooden and hardwood floors, stairs, furniture and other wooden items.

APPLICATION

PRELIMINARY WORKS:

Sand the surface with an abrasive material with a grit size of 120 — 150.
Clean the floor from dust and litter using a vacuum-cleaner.
It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 — 60 %. It is necessary to ensure a good air flow during the whole application and drying process.
MANUAL APPLICATION
MECHANICAL APPLICATION

MANUAL APPLICATION

Important! Shake well before use. It is recommended to preliminary test the wood stain on a small sample or a part of sanded surface in order to see the actual finish color.

Apply the wood stain with a rubber trowel distributing it evenly on the surface.
After an application rub the wood stain with rugs to the surface removing the excess.
When the first layer is dry, apply the second layer in the same way.
Time to dry:
When applying one layer — 4 hours.
When applying two layers:
first layer – 1 hour;
second layer – 6 hours.

MECHANICAL APPLICATION

Important! Shake well before use. It is recommended to test the wood stain on a small sample of grinded wood to define the surface color.

Apply the wood stain with a rubber trowel distributing it evenly on the surface.
Remove the wood stain excess with cotton rags. Rub the wood stain with a single-disk white pad buffing machine.
When the first layer is dried out, apply the second layer in the same way.
Time to dry:
When applying one layer — 4 hours.
When applying two layers:
first layer — 1 hour;
second layer – 6 hours.
NOTE: Hard-to-reach places, unavailable for mechanical application (angles, joints), can be treated with cotton rugs or thin brush.
FLOORING CARE:
We recommend to use care products for lacquered hardwood floors.
TOOLS CLEANING:
Tools are easily cleaned with water. Remains of dry wood stain can be removed with acetone.
Catalogue

Catalogue

TDS

TDS

MSDS

MSDS

Service manual

Service manual

ComponentsDescription
PU acrylic compoundWater-based urethane dispersion of components creates a solid and bright toning on the surface.
Water
Pigments
I’ve read and accept the privacy policy

Reviews

There are no reviews yet.

Be the first to review “Waterborne wood stain”

Your email address will not be published. Required fields are marked *

I’ve read and accept the privacy policy

You may also like…

Contacts
Dealers' area
News and media
Sitemap

Follow us

LinkedIn
YouTube
Vimeo
Instagram
Pinterest
Houzz
Viber
RSS

Certificates

nwfa_logo ce_logo ISO 9001leed-logo

Contacts

Republic of Belarus,
Y. Kolasa str., 2B, Zaslavl
+375-17-543-2012
+375-17-543-2020
sales@coswick.com
© Coswick Ltd. 2008-2023 All rights reserved | Privacy Statement | Terms Of Use