Tinted oil for restoration of oiled and hardwax-oiled hardwood ﬂoors

Technical sheet
Description and application
Downloads
Components
Ask our experts
Reviews (0)

Product name	TDS	Category	Packing	Consumption	Box pcs	Tray pcs	Manufacturing standard
Tinted oil for restoration of oiled and hardwax-oiled hardwood ﬂoors		Local repair and renovation products	0.75 L	5 – 10 ml/m²	9 pcs.	432 pcs.	TУ BY 101040134.002-2014

COLOR PALETTE

Aqua White
Art:4260-020042

Batiste
Art:4260-020018

Barselona
Art: 4260-020027

Verona
Art:4260-020053

Rauchtopaz
Art:4260-020005

Geneva
Art:4260-020020

London
Art:4260-020026

Marseille
Art:4260-020028

Neapolis
Art:4260-020052

Snowdrop
Art:4260-020093

Payne’s Grey
Art:4260-020091

Grey Velvet
Art:4260-020074

Grey Ash,
Art:4260-020003

Grey Cashmere
Art:4260-020051

Davy’s Grey
Art:4260-020055

Spinel Grey
Art:4260-020067

Raw Sienna
Art:4260-020009

Old Venice
Art:4260-020021

Titanium Buff
Art:4260-020031

Misty Fjords
Art:4260-020063

Readiness condition	Time to dry	Shelf life	Storage and transportation conditions
Ready to use	For light loads (walking) — 12 hours in a well ventilated room. Time before using floors is not less than 24 hours. Maximal protective characteristics are available in a week.	12 months	Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

Safety requirements:
For intended use only. Keep out of reach of children. Wear suitable rubber gloves when using the oil. Avoid contact with mucous membranes. If underventilated, use a respiratory protection. Do not inhale oil fumes. Avoid release to the environment.

Disposal:
Dispose of the preliminary water-soaked rags with oil remains in the tightly closed container.

Description and application

DESCRIPTION

Tinted oil for restoration of oiled and hardwax-oiled floors is developed specifically for restoration of the wear layer of wooden surfaces (hardwood flooring, furniture, stairs, wall panels) finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil).

The oil creates a thin oil-soaked wear and tear resistant layer on wooden surfaces. Gives a water- and soil-repellent features to the surface.
Micronized pigments from tinted oils restore the overall tone of the wooden surface while keeping the texture intact.

It is used when the hardwood flooring surface looks too “dry” (rough) or the main finish was worn off due to the heavy loads.

APPLICATION

PRELIMINARY WORKS:

Clean the floor from sand, dust and litter using a vacuum-cleaner.

Clean the floor with the hardwood flooring cleaner. Avoid overwatering, after the cleaning the flooring has to be dry in 2-3 minutes.

It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure the good air flow during the whole application and drying process.

MANUAL APPLICATION

MECHANICAL APPLICATION

MANUAL APPLICATION

Important! Shake well before use. It is recommended to test the tinted oil on a small sample of sanded wood to define the actual color.

Apply the oil to the ﬂooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute the tinted oil evenly.

After application, rub the oil on the surface with clean cotton rags.

Remove the oil excess to avoid heavy stains and beads.

Time to dry:
For light loads (walking) – 12 hours,
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.

MECHANICAL APPLICATION

Important! Shake well before use. It is recommended to test the tinted oil on a small sample of sanded wood to define the color of the surface..

Apply the oil to the ﬂooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute the tinted oil evenly.

Remove the oil excess to avoid heavy stains and beads.

After the application, rub the oil using a single-disk white pad buffing machine.

Time to dry:
For light loads (walking) – 12 hours,
Time before using floors not less than 24 hours.
Maximal protective characteristics are available in a week.

Note: Hard-to-reach places, unavailable for mechanical application (angles, joints), can be treated with cotton rags or thin brush.

FLOORING CARE:
We recommend to use the cleaner for oiled and hardwax-oiled hardwood floors.

TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.

Component	Description
Natural oil	Optimized composition of natural oils penetrates deeply into the pores. Once dry, the oil-treated fibre creates a durable and wear-resistant layer.
Pigments	Micronized pigments color the surface creating deep and saturated tone.

Reviews

There are no reviews yet.

Tinted oil for restoration of oiled and hardwax-oiled hardwood ﬂoors

COLOR PALETTE

Description and application

DESCRIPTION

APPLICATION

MANUAL APPLICATION

MECHANICAL APPLICATION

Catalogue

TDS

MSDS

Service manual

Reviews

Be the first to review “Tinted oil for restoration of oiled and hardwax-oiled hardwood ﬂoors” Cancel reply

You may also like…

Protective wax for oiled and hardwax-oiled hardwood floors

Cleaner concentrate for oiled and hardwax-oiled hardwood floors

Renewer oil for oiled and hardwax-oiled hardwood ﬂoors

Follow us

Certificates

Contacts